 Product description Huatai B9243, 2 output ports, each port output level≥103dBμV when the receiving optical power is -2dBm, 2 outputs with high level, is mainly used in FTTB, FTTN, FTTC, as RFTV broadcast network's RX unit, it is a kind of high index, Low power consumption, high cost performance RFTV optical receiver.
This series of products adopts high sensitivity receiving tube and Huatai special low noise matching circuit under 3.8% modulations. When transmitting in full channels and with receiving power of -10dBm, the CNR can still reach high index of 45dB. Therefore, if adopting B9243, it is only need very low optical power to reach 45dB CNR required by the user.
The product built-in RF inter-stage gain adjustment. All receiving optical power in the range of +3dBm to -12dBm(Vo≤88dBμV) has good linearity. According to different receiving optical power, the user can choose high CNR and suitable output level.
B9243: RFTV operates in 1210~1600nm wavelength.
B9243/WF: built-in channel filter, RFTV operating in1550nm wavelength.
B9243/WD: build-in CWDM, RFTV operating in 1550nm wavelength, reach GEPON ONU through 1310/1490nm wavelength.
Product feature  The smallest size in the market and 2 output with the highest level
Very low noise (3.8% modulated, -10dBm receive, CNR≥45dB)
All receiving optical power in the range of +3dBm to -12dBm has good linearity. In the range of 47~862MHz, all have good flatness property (FL ≤ 1.0dB). Built-in inter-stage gain adjustment, can choose high CNR and suitable output level according to different receiving optical power. 2 way high level output, can supply service for more users Zinc. die-casting all-in-one metal shell, supply safeguards to opto-electrical sensing device Low power consumption, high cost performance Main application FTTB, FTTN, FTTC HFC Status indicator Input optical power status indicator : ≤-13dB LED off +3dBm ~ -12dBm Green
+3dBm Red
Power supply indicator: Turn on Green Turn off LED off
Matters need attention It has good characteristic when the receiving optical power is in the range of +3dBm ~ -12dBm. When the receiving optical power is in the range of +3dBm ~ -2dBm, it can obtain high system CNR, on the condition that per output level of built-in PAD is adjusted to ≤ 103dBμV (all-channel transmission) to guarantee the system distortion index.
When receiving optical power ≤-3dBm, in order to gain high output level and cover more users, the attenuation value of the built-in PAD can be adjusted to minimum.
The RF is two -port balanced output, and is not access to the system output port. It should be connected to 75Ω fictitious load. (Options). It is easy to be maintained because of adapting outside adaptation power. Its power output voltage is DC+24V+1V and working electricity is 400mA. Principle |
